GET STARTED

We are calculating your project costs...

XPS Fence Layout



Enter your fence configuration

Describes the maximum height of the fence posts from ground level to the top of the post. The first slat starts 8mm lower.

Describes the minimum space between ground level and the bottom of the first slat. Can be defined if roots or other obstructions are present. Otherwise, the gap will be minimised.

0 mm Slat Spacing means 100% privacy



Select Number Of Fence Sides

1 Fence Side
One
2 Fence Sides
Two
3 Fence Sides
Three



Select Post Installation Method

Base Plated Post
Base Plated
In Ground Post
In Ground
You need to select an item to continue

XPS Fence Calculations



Enter the dimensions required below

Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides in windy areas.

Describes the height of the top slat from ground level.

IF, the bottom gap is too big, adjust fence height or try different slat spacing.

Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides in windy areas.

Describes the height of the top slat from ground level.

IF, the bottom gap is too big, adjust fence height or try different slat spacing.

Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides in windy areas.

Describes the height of the top slat from ground level.

IF, the bottom gap is too big, adjust fence height or try different slat spacing.

You need to select an item to continue

Choose Your Slat Fence Situation

Choose one of the below scenarios to start planning your Aluminium Slat Screening Fence

XPS - System
Xpress Plus System

The XPS - System is ideal for DIY to create a stable and long lasting but quick to install screening fence. It is best on level ground. 

SFS - System
Side Frame System

The SFS - System is ideal for fences between existing brick or wall structures as commonly used at property fronts.

The QES - System is best for projects where a bit more customisation is needed, like on level ground. It is also the preferred method for certain gate types.


You need to select an item to continue

SFS Fence Layout


How many differently sized fence sections do you have?

Enter Width & Height and Quantity for each unique section.

Describes the maximum height of the fence posts from ground level to the top of the post. The first slat starts 8mm lower.

Simply enter the full width between your walls or posts. We allow automatically for necessary gap spacings.

Use this field to define the number of sections in your fence project that have the same height and width

Enter General Fence Details

0 mm Slat Spacing means 100% privacy. The most common spacing is 9mm. For additional privacy without fully closing off the section, 5mm is recommended.

Choose from 2 different width for our slats. 65mm is the standard width, looking the best. 90mm is often used to match the look of existing fence sections made from wood.

Describes the minimum space between ground level and the bottom of the first slat. Can be defined if roots or other obstructions are present. Otherwise, the gap will be minimised.

Do you require a gate

Enter absolute width between your 2 walls. We account for posts, hinges, latches etc.

Enter the absolute height of the wall the gate will be attached to. If the terrain is on a slope, use the shorter measurement.

Space between bottom of gate to ground. Choose according to preference and environment. If small rocks are near or pets have to pass underneath, adjust accordingly.

Select your latch type
Knob Handle
Knob
Dead Latch
Dead Latch
You need to select an item to continue

SFS Fence Calculations

Enter further details below so we can provide you with an accurate estimate

Overview of Fence Material List & Details

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

You need to select an item to continue

QQES Fence Layout

How many different fence sections do you have?
A new section is when any of the following parameters change:

  • Height of Fence from one section to another
  • Slope of terrain changes from level to sloped 
  • Direction of Fence changes by 90º or at a custom angle
Enter Width & Height and Quantity for each unique section.

Enter the total width of this section; measure from corner to corner. We automatically include all necessary gaps and allowances for posts, frames and slats.

Describes the maximum height of the fence; the highest point is the fence post, around 8mm above the top slat.

Means angle between sections is different to 90º or 180º

Enter Fence Configuration

0 mm Slat Spacing means 100% privacy. The most common spacing is 9mm. For additional privacy without fully closing off the section, 5mm is recommended.

Choose from 2 different width for our slats. 65mm is the standard width, looking the best. 90mm is often used to match the look of existing fence sections made from wood.

Describes the minimum space between ground level and the bottom of the first slat. Can be defined if roots or other obstructions are present. Otherwise, the gap will be minimised.

Post Installation Method
Base Plated Posts
Base Plate
In Ground Post
In Ground
You need to select an item to continue

QES Fence Calculations

Enter further details below so we can provide you with an accurate estimate

Overview of Fence Material List & Details

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

For calculations

Including top and bottom caps. Total height of side frame channel

Visible Slat Width between Frames

You need to select an item to continue

QES Contact Form


The QES System is necessary when working on sloped terrain.
Otherwise, we recommend working with XPS or SFS.

Please provide us with basic measurements for your project and leave us your details below.
One of our fence experts will reach out to you at your convenient time.

What is the best time to contact you
You need to select an item to continue

XPS Colour Selection

In order finalise the costing calculation for your fence project,
please select your color of choice
Basalt Satin
Black Satin
Dune Satin
Mill Grey
Monument Black
Palladium Silver
Surfmist Matt
White
Woodland Grey
NON COLOUR ITEMS
Basalt Satin
Palladium Silver
Surfmist Matt
White
Woodland Grey
Black Satin
Dune Satin
Mill Grey
Monument
You need to select an item to continue

Project Overview

Enter further details below so we can provide you with an accurate estimate

Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides.

Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides.

You need to select an item to continue

SFS Colour Selection

In order finalise the costing calculation for your fence project,
please select your color of choice
Basalt Satin
Black Satin
Dune Satin
Mill Grey
Monument Black
Palladium Silver
Surfmist Matt
White
Woodland Grey
NON COLOUR ITEMS
Basalt Satin - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Basalt Satin - Gate
Black Satin - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Black Satin - Gate
Dune Satin - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Dune Satin - Gate
Mill Grey - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Mill Grey - Gate
Monument Black - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Monument Black - Gate
Palladium Silver - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Palladium Silver - Gate
Surfmist - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Surfmist - Gate
White - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

White - Gate
Woodland Grey - Fence Panels

Includes Fence Slats + Gate Slats + Gate Blades

Woodland Grey - Gate
You need to select an item to continue

Final Step

The final estimated price is :

What is your time frame?





Are you installing yourself?




Where do you want us to send your detailed quote?

G'day 
We respect your privacy! We don't share your contact details with any third parties! We don't send any generic marketing! We may give you a courtesy call, or email. Just to make sure all questions are answered and your DIY Fence becomes an easy success! You can opt out any time! This is our professional promise.


Recommendations & Feedback 

Summary

Description Information Quantity Price
Discount :
Total :