Vertical Paling Semi-Privacy Panel Kit

Dimensions: 2388mm Wide x 1800mm High

• Material: White UV-stabilized PVC with titanium dioxide for added protection
• Design:
  • Top Rail: 2388mm W x 89mm H x 51mm D; 2.8mm wall thickness
  • Bottom Rail: 2388mm W x 89mm H x 51mm D; 2.8mm wall thickness with an aluminum insert for added rigidity
  • Palings: 1690mm H x 76mm W x 22mm D, with a 58.5mm gap between palings
  • Palings easily insert into punched rails
• Overall Height: Achieves a total panel height of 1800mm
• Assembly: Flat pack kit in a box for easy assembly
• Optional Extra: Midrail sold separately. The midrail is recommended for installations with fence heights from 1500mm up to 1800mm. Refer to page 49 for guidance on midrail installation.

Ideal For: Front or boundary fencing, providing a balance of privacy and style with its semi-privacy design.

Installation Styles for Panels and Posts

Style 1: 1800mm High with Midrail (Center)

• Installation:
  • Suits existing routed slots in posts for bottom and top rails.
  • Requires midrail: Route slots in posts or install with shrouds.

Style 2: 1800mm High with Midrail (¾ Up)

• Installation:
  • Suits existing routed slots in posts for bottom rail and top rail.
  • Requires midrail: Route slots in posts or install with shrouds.

Style 3: Under 1500mm High with No Midrail

• Installation Options:
  • Method 1: Use a 2100mm high full post (with no slot holes) and install the top and bottom rails using shrouds only. Cut vertical palings to the required height.
  • Method 2: Route new bottom rail slot to suit the new panel installation height. Cut vertical palings to the required height.

Style 4: Under 1500mm High Picket with Points Level

• Installation:
  • Method 1: Use the existing pre-routed slot at the bottom of the post. Adjust the height from the top of the post by cutting off the existing top slot and routing a new slot at the desired height. Discard the top rail in the kit and purchase a midrail to use as the top rail.
  • Method 2: Use a 2100mm high full post (with no slot holes). Cut palings to the required height and press in triangular pointed toppers.

Style 5: Under 1500mm High Pickets with Points Starting Higher

• Installation:
  • Method 1: Use the existing pre-routed slot at the bottom of the post. Adjust the height from the top of the post by cutting off the existing top slot and routing a new slot at the desired height. Cut palings to the required height and press in triangular pointed toppers.
  • Method 2: Use a 2100mm high full post (with no slot holes). Cut palings to the required height and press in triangular pointed toppers.