To help calculate how many panels, posts & gates you will need use the following dimensions:

• Typical Latch Gap = (Lite Duty 10mm) to (Heavy Duty 20mm)
• Typical Hinge Gap = (Duluxe = 18mm) (Heavy Duty = 25mm)
• Gap between panel & post = 5mm to 10mm
• For custom gate widths less than 2450mm Use 1x Panel & 1x Conversion Gate Kit

To help calculate how many panels, posts & gates you will need use the following dimensions:

• Typical Latch Gap = (Lite Duty 10mm) to (Heavy Duty 20mm)
• Typical Hinge Gap = (Duluxe = 18mm) (Heavy Duty = 25mm)
• Gap between panel & post = 5mm to 10mm
• For custom gate widths less than 2450mm Use 1x Panel & 1x Conversion Gate Kit

You can Bolt-Down or Cement your posts in, To select the correct post use the following tips:

• Typical Gap beneath panels = 100mm
• Typical length required in post hole = 500mmFor fencing on flat ground use 2400mm Posts
• For Bolt-Down Fixings use 2400mm Posts and trim to suit
• For fencing on a slope use 2700mm Posts and trim to suit

• Only Heavy Duty Gate Kits are lockable
• (250kg Rated) Bolt-On Heavy Duty Hinges recommended for wide gates in high traffic areas.

• We HIGHLY Recommend ordering 1xPack of extra Tek Screws for each project
• Recommended to use a min of 1-2 Anti-Tamper screw per Bracket, Hinge & Latch
• TYP 1.5 bags of Kwikset cement required per cement in post